What is the fastest Pinewood Derby car design?
But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track.
Should a pinewood derby car be light or heavy?
8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow. In general, it’s best to place weight to the rear of your car because a heavier rear increases speed.
Should I bake my pinewood derby car?
Per the Pinewood Derby rules, the weight of the car shouldn’t exceed 5 ounces. One way to ensure your car doesn’t go over the weight limit is to bake the block! Naturally, wood holds water, and water adds weight. You’ll want to help your Scout by baking the block in an oven at 250 degrees for one hour.
Can a pinewood derby car be too heavy?
Assuming all other factors are equal, a heavier car will be faster than a lighter car. The Pinewood Derby rules limit the weight of each car to 5 ounces.
Do you glue Pinewood Derby axles?
Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.
What kind of saw do you use to cut a Pinewood Derby car?
Band saws are the best tool for cutting a Pinewood Derby car block. If you don’t have access to a band saw, a coping saw will do. Coping saws are economical and can cut unusual shapes and curves. Coping Saws are intended for cutting curves in thin material but they can be used for cutting your Pinewood Derby car.
Can a pinewood derby car have 3 wheels?
You may sand the wheels to remove the seam or other imperfections on the surface, but the profile may not be changed (i.e. you can’t make the wheel width thinner). c. Cars can run with 3 wheels touching the track, but the 4th must be installed.
Where should the center of gravity be on my pinewood derby car?
Many pinewood car building experts agree that the ideal CG location is about ¾” just forward of the rear axle (assumes a standard pinewood derby car wheel base of 4 3/8”).
Does graphite help pinewood derby car?
Powdered graphite is an excellent lubricant to reduce friction on pinewood derby axles. Why do you want to reduce friction on your axles? It’s simple physics; reduce friction to make your car faster. Stated another way, the fastest cars have the least friction.
Should I sand my Pinewood Derby wheels?
Running the drill at low speed, carefully sand the tread area of the wheel just enough to take off the mold “flash” at the outside edge of the tread and smooth the tread area down to take out the “dimple” which is typically where the wheel was cut off the “sprue” or mold tree.
How long does it take to make a Pinewood Derby car?
How long does it take to build a pinewood derby car? Plan on at least one day to cut and sand the car, another day to paint it and a third day to add decals and the wheels and axles.
Does a heavier pinewood derby car go faster?
Much has been written about the physics of pinewood derby cars, and this is one rare case in racing where heavy = fast. Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track.
Does a longer wheelbase make a pinewood derby car faster?
The longer the wheel base, the greater the turning distance (a short car turns much more quickly than a long car). A pinewood derby car should go as straight as possible, so a longer wheel base is an advantage.
What is the perfect weight for a Pinewood Derby car?
MAX OUT YOUR CAR’S WEIGHT AT 5 OZ In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights.
Can you use glue on Pinewood Derby car?
For pinewood derby cars, white glue works fine for gluing wood to wood (such as adding wood accessories) and for repairing chips or cracks in the wood. It can also be used for holding the axles in place. White glue doesn’t work well on metal, so don’t use it to glue metal accessories or weight to the car.
How thin should a Pinewood Derby car be?
1/4″ is thin enough. Most of my cars are 1/4″ in the rear and taper to the front. By making the car much thinner then that, you are putting yourself at risk for the car breaking. It is possible to make them thinner, but it is not really needed.
Where is the best place to put the weight on a pinewood derby car?
Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.
What is a good pinewood derby time?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).
How do you win pinewood derby secrets?
Bake your block. Max out your weight at the regulation 5 ounces. Use all of the graphite. Sand and polish your wheels and axles. Check alignment. Spend time sanding. Use a high-quality paint. Add decals.
What is the best length for a mousetrap car?
Max Length – 45 cm. Max Width – 20 cm. Height – 20 cm. Min ground clearance – 4 cm.