What is the best shape for a fast Pinewood Derby car?

What is the best shape for a fast Pinewood Derby car?
But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track.

Does a heavier Pinewood Derby car go faster?
Much has been written about the physics of pinewood derby cars, and this is one rare case in racing where heavy = fast. Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track.

Should a Pinewood Derby car be light or heavy?
8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow. In general, it’s best to place weight to the rear of your car because a heavier rear increases speed.

What weight should I use for my derby car?
Tungsten is the best weight for your pine derby car because it allows you to pack more weight in a smaller area giving you more flexibility in your car design and more accurate weight placement for speed. Package contains eight 3/8″ diameter cylinders with chamfored edges for easy insertion.

What is the perfect weight for a Pinewood Derby car?
The more your pine car weighs, the faster it will go on a downhill ramp. Most rules specify a 5 oz. maximum weight. Most Pinewood Derby cars weigh between 1.5 oz and 3.5 oz (depending on design) without weights so a car may need 3.5 oz or more of additional weight.

Do you glue Pinewood Derby axles?
Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.

What is the best type of paint to use on a pinewood derby car?
High-quality, Testors-Model Master acrylic paints are easy to apply, wash up with water, and most importantly, provide a great finish for your pinewood derby car.

Should you sand Pinewood Derby wheels?
The hub can be coned using a lathe, a rotary tool or drill press with a grinder bit, or a special hub tool for pinewood derby wheels. When the plastic has been removed, the hub surface should be sanded first with #220 and then #400 sandpaper and buffed with a plastic polish.

Do aerodynamics matter in Pinewood Derby?
A more aerodynamic car (but very similar for other things) doesn’t give you much bang for your buck. Friction will get you. If you can reduce the coefficient of friction by just a little bit, it will make a noticeable difference. If you let your kids do most of the work, they will gain more than a win.

Do heavier cars corner better?
In theory, a lighter car may handle corners better than a heavy car on a wet roads, as it has less inertia to continue in a straight line, however its lighter weight, there is less friction or adhesion to the road.

Does a longer wheelbase make a Pinewood Derby car faster?
The longer the wheel base, the greater the turning distance (a short car turns much more quickly than a long car). A pinewood derby car should go as straight as possible, so a longer wheel base is an advantage.

Should I bake my Pinewood Derby block?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. You can then add more weight to the back of the car.

Where is the best place to put weight on a pinewood derby car?
Best Location to Weight Your Pinewood Derby Car When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.

Where should the center of gravity be on my pinewood derby car?
Many pinewood car building experts agree that the ideal CG location is about ¾” just forward of the rear axle (assumes a standard pinewood derby car wheel base of 4 3/8”).

Can a Pinewood Derby car be too heavy?
Assuming all other factors are equal, a heavier car will be faster than a lighter car. The Pinewood Derby rules limit the weight of each car to 5 ounces.

Can a pinewood derby car have 3 wheels?
You may sand the wheels to remove the seam or other imperfections on the surface, but the profile may not be changed (i.e. you can’t make the wheel width thinner). c. Cars can run with 3 wheels touching the track, but the 4th must be installed.

What is a good pinewood derby time?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).

Can a Pinewood Derby car be shorter than 7 inches?
Length and Wheelbase of Pinewood Derby Cars. The length of your Pinewood Derby car is very simple to choose. The rules state a maximum 7-inch length. You want the car to be that long, minus just a little bit (say 1/16″) to allow for judging and measurement slop.

Does graphite help pinewood derby car?
Powdered graphite is an excellent lubricant to reduce friction on pinewood derby axles. Why do you want to reduce friction on your axles? It’s simple physics; reduce friction to make your car faster. Stated another way, the fastest cars have the least friction.

How can I make a remote control car?
Step 1: Watch the Video. Step 2: Order Parts. Step 3: Prepare Base & Rear Axle. Step 4: Make Steering Mechanism. Step 5: Make Cardboard Wheels. Step 6: Make Electronic Steering. Step 7: Connect the Components. Step 8: Make Body Parts.

Leave a Reply

Your email address will not be published. Required fields are marked *