What is the average speed of a mousetrap car?
(Mousetrap cars typically operate with speeds in the range 0–3 m/s.
Should a mousetrap car be heavy or light?
Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance. Always use lightweight components when building a mousetrap vehicle. bonus tip: lightweight mousetrap vehicles require less pulling force off the start.
What is the best amount of wheels for a mousetrap car?
So what is better, three wheels or four wheels? The answer depends on the contest, if we are to build a super fast accelerating speed-trap racer then over coming rotational inertia is one of the main objectives therefor three wheels will always do better than four wheels when it comes to performance.
What are the best wheels for a mousetrap car?
CDs. CDs make one of the cheapest and easiest to use tires for a mouse trap car. The type of CD doesn’t matter, and you can even use DVDs if you like. However, you should make sure you don’t want to use the CD anymore.
How long should the lever be on a mousetrap car?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
Are big wheels better for a mousetrap car?
Wheels and Axles Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.
What is the best wood for a mousetrap car?
Balsa wood, pine, or bass wood are excellent choices although balsa wood is somewhat brittle and hard to drill holes into without ripping. Other materials can also be used for making a light weight strong and stiff frame. These include Styrofoam, corrugated cardboard, plastics, aluminum and brass tubing.
How do you increase the friction of a mousetrap car?
Larger diameter axles have greater friction when compared to the same axle of a smaller diameter. With a smaller diameter axle the force of friction is applied closer to the center of rotation and applies less torque than a larger diameter axle. Try to select axles that are equal to or less than 3/16 inch in diameter.
How far can a mousetrap car travel?
The length of the string is about 25″. Therefore the string can be wrapped around the dowel 25/0.785 = About 31.8 times. So the minimum distance travelled will be the number of times the string can wrap around the dowel multiplied by the circumference of the wheels, which is 31.8 x 14.92 = 474.456″, or about 39.5ft!
What is the physics behind a mousetrap car?
By winding the string around the axle, the mousetrap’s spring, when released, pulls on the string causing the wheels to turn and thus making the car move (there are, however, other creative ways to convey power from the mousetrap to the car).
What makes a good mousetrap car?
You’ll want to design your car to have a light body, have large rear wheels, and you’ll want to position the mousetrap as close to the front of the car as possible. Having a light bodied mouse trap car allows for less work to have to be done by the mousetrap getting the car going.
What is the fastest mousetrap car design?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
How big should mousetrap car wheels be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.
Does the length of a mousetrap car matter?
Vehicle weight is an important factor to consider reducing if your mousetrap vehicle is not traveling far enough. The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
How do you make a mousetrap car stop at a certain distance?
Setting the braking system is simple and easy: just place the vehicle at the finish line with the wing nut in the lock position, roll the vehicle back to the start line and the wing nut is set to the exact starting position.
Why do mousetrap cars use CDs?
Why do so many mousetrap cars use CD/DVD for wheels? Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle. CD/DVD wheels can slice through the air with very little air resistance and they have very little rotational inertia.
Is there a pulley in a mousetrap car?
Introduction: Mousetrap Car The car uses physics and engineering concepts such as pulleys, levers, and springs to convert potential energy to kinetic energy which moves the car along.
Is weight important in a mousetrap car?
The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
How does gravity affect a mousetrap car?
The force of gravity remains unchanged for all angles. The difference between the two forces causes the force down the ramp to increase. The greater the angle required to move the car, the more friction there will be acting against the car’s motion.
How do you make a working paper car?
To make a paper car, use card stock to draw a T-shaped template. Then cut it out and fold the top right part of the horizontal across the center to the left, and the left part across to the right, so you have a vertical bar and two prongs.