What are the best materials for a mousetrap car?
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.
Should a mousetrap car be heavy or light?
Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance. Always use lightweight components when building a mousetrap vehicle. bonus tip: lightweight mousetrap vehicles require less pulling force off the start.
How do you make a mousetrap car go super far?
lever arm length If you haven’t realized it yet, increasing the length of the lever arm attached to the mousetrap, increases the total mechanical advantage of the car. Therefore, to increase your car’s speed, you can reduce the length of the lever arm attached to the mousetrap.
How do you make a mousetrap car go forward and backwards?
To make a reversing mousetrap car go forward and then come back you will need to know how to “back-wind” the string. Back-winding the string it a technique where you first wind the string around the axle in one direction and then rewind the string in the opposite direction.
What kind of string is best for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.
How do you put traction on CD wheels?
step #1: cut the center section of a rubber balloon as pictured. step #2: stretch the cut section of the rubber balloon around the CD/DVD. alternate option: rubber bands can also be stretched around a wheel to increase the traction.
Why is my mousetrap car not moving?
If you place your mousetrap vehicle on the ground and the vehicle does not move, or it does not accelerate as quickly as needed, then you can do one of two things, you can shorten the length of the lever arm and reposition the mouse trap closer to the drive axle or you can build up the drive axle with tape (see how to …
What is the lever arm on a mousetrap car?
A mousetrap car works on the principle of a lever. One end of the lever is connected to a spring. When a force is used to pull up the other end of the lever up, the spring tightens, storing energy. When the lever is released, the stored energy in the spring is transferred back to the lever, and the end snaps back.
Is weight important in a mousetrap car?
The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
Is 3 wheels better than 4 in mousetrap car?
So what is better, three wheels or four wheels? The answer depends on the contest, if we are to build a super fast accelerating speed-trap racer then over coming rotational inertia is one of the main objectives therefor three wheels will always do better than four wheels when it comes to performance.
Why do mousetrap cars use CDs?
Why do so many mousetrap cars use CD/DVD for wheels? Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle. CD/DVD wheels can slice through the air with very little air resistance and they have very little rotational inertia.
What is the best length for a mousetrap car?
Max Length – 45 cm. Max Width – 20 cm. Height – 20 cm. Min ground clearance – 4 cm.
What makes a mousetrap car fast?
A speedy mousetrap car will have smaller wheels (faster acceleration), a shorter lever arm (increased torque, but smaller travel distance), a larger axle (increased acceleration) and will generally be smaller to decrease air resistance.
Are big wheels better for a mousetrap car?
Wheels and Axles Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.
What is the fastest mousetrap car design?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
Does the length of a mousetrap car matter?
Vehicle weight is an important factor to consider reducing if your mousetrap vehicle is not traveling far enough. The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
Is wood or cardboard better for mousetrap car?
Balsa wood, pine, or bass wood are excellent choices although balsa wood is somewhat brittle and hard to drill holes into without ripping. Other materials can also be used for making a light weight strong and stiff frame. These include Styrofoam, corrugated cardboard, plastics, aluminum and brass tubing.
How long should dowel be on mousetrap car?
If you have larger drive wheels, these should go on the rear axle and the smaller wheels on the front axle. Your axle dowels should extend past your wheel about 1″ (2.5 cm). around your dowel just outside each of wheels. The elastic band will keep the wheels from falling off of the car.
How long should the lever arm be on a mousetrap car?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
How do you make a fast mousetrap car?
If you haven’t realized it yet, increasing the length of the lever arm attached to the mousetrap, increases the total mechanical advantage of the car. Therefore, to increase your car’s speed, you can reduce the length of the lever arm attached to the mousetrap.