How do you make a fast mousetrap car?
If you haven’t realized it yet, increasing the length of the lever arm attached to the mousetrap, increases the total mechanical advantage of the car. Therefore, to increase your car’s speed, you can reduce the length of the lever arm attached to the mousetrap.
Should a mousetrap car be heavy or light?
Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance. Always use lightweight components when building a mousetrap vehicle. bonus tip: lightweight mousetrap vehicles require less pulling force off the start.
What is the best wood for a mousetrap car?
Balsa wood, pine, or bass wood are excellent choices although balsa wood is somewhat brittle and hard to drill holes into without ripping. Other materials can also be used for making a light weight strong and stiff frame. These include Styrofoam, corrugated cardboard, plastics, aluminum and brass tubing.
What is the best string to use for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.
What is the best amount of wheels for a mousetrap car?
So what is better, three wheels or four wheels? The answer depends on the contest, if we are to build a super fast accelerating speed-trap racer then over coming rotational inertia is one of the main objectives therefor three wheels will always do better than four wheels when it comes to performance.
Does the length of a mousetrap car matter?
Vehicle weight is an important factor to consider reducing if your mousetrap vehicle is not traveling far enough. The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
How do you make a mousetrap car stop at a certain distance?
Setting the braking system is simple and easy: just place the vehicle at the finish line with the wing nut in the lock position, roll the vehicle back to the start line and the wing nut is set to the exact starting position.
Why is my mousetrap car not going straight?
If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!
What is the best width for a mousetrap car?
Max Length – 45 cm. Max Width – 20 cm. Height – 20 cm. Min ground clearance – 4 cm. Mass – 2 kg.
What can I use for an axle on a mousetrap car?
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing.
What is the fastest mousetrap car design?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.
Are big wheels better for a mousetrap car?
Wheels and Axles Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.
How long should a mousetrap car string be?
The length of the string is about 25″. Therefore the string can be wrapped around the dowel 25/0.785 = About 31.8 times. So the minimum distance travelled will be the number of times the string can wrap around the dowel multiplied by the circumference of the wheels, which is 31.8 x 14.92 = 474.456″, or about 39.5ft!
What is the best length for a lever arm for mousetrap car?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.
Is weight important in a mousetrap car?
The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.
How do you make a mousetrap car go forward and backwards?
To make a reversing mousetrap car go forward and then come back you will need to know how to “back-wind” the string. Back-winding the string it a technique where you first wind the string around the axle in one direction and then rewind the string in the opposite direction.
What makes a mouse trap car go further?
To adapt your mousetrap car for distance, use large, light wheels for less friction and greater inertia. For example, old CDs make great wheels to increase distance. If your car is a rear-wheel drive car, set the wheels on a narrow rear axle so the wheels turn more and travel further.
Why are CDs good for mousetrap cars?
Why do so many mousetrap cars use CD/DVD for wheels? Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle. CD/DVD wheels can slice through the air with very little air resistance and they have very little rotational inertia.
How do you make a mousetrap stronger?
Stiffening the Torsion Spring The more coils on a torsion spring, the greater the force output. That’s because the more that you twist it around, it’s as if you’re building and storing energy.
How do you make an elastic car turn?
Loop a rubber band through itself around the middle, exposed part of the wooden skewer (where you cut out a notch in the cardboard and straw). Tape the rubber band to the skewer to prevent it from slipping—when the skewer rotates, the rubber band should rotate with it.